MikroTik MTCNA – Certified Network Associate Training Course
MikroTik MTCNA is the entry level for any student or engineer who wants to start learning MikroTik. MTCNA is always a prerequisite course for the more advanced tracks that MikroTik is providing.
For this reason, I have designed this course to help you to get a 1st insight to MikroTik and help you to understand all topics that are available on the MTCNA track to be able to be ready for the MTCNA exam.
This training (MTCNA) included information to dealing with MikroTik operating system (Router OS) and configuration the devices and connect it with the internet and intranet and protect the network from the external attack.
The MTCNA training is included the following:
- Module 1 MikroTik RouterOS introduction.
- Module 2 MikroTik RouterOS DHCP.
- Module 3 MikroTik RouterOS Bridging.
- Module 4 MikroTik RouterOS Routing.
- Module 5 MikroTik RouterOS Wireless.
- Module 6 MikroTik RouterOS Firewall.
- Module 7 MikroTik RouterOS QoS.
- Module 8 MikroTik RouterOS Tunnels.
- Module 9 MikroTiK RouterOS Tools.
As you can see, there are many topics that are covered in this course and on each of the topics there are sub-topics. A lot of LABS will be done on each of the topics so you can understand practically how you can configure all these topics on the MikroTik.
Requirements
Who this course is for
For more information
https://i.mt.lv/cdn/training_pdf/mtcna_outline_2019181161836.pdf
MikroTik MTCRE – Certified Routing Engineer Training Course
MikroTik MTCRE is at the 2nd level certificate from MikroTik, and it is considered in the Engineering level. This course will speak about everything related to Routing at the Intermediate level. Being MikroTik MTCRE certified is a prerequisite for the higher level Routing certificate which is MTCINE
For this reason, we have designed this course to help you understanding how Routing happens in MikroTik and be ready for the MikroTik MTCRE exam.
The MTCRE training is included the following:
- Module 1 static routing.
- Module 2 point to point addressing.
- Module 3 VPN, VLAN.
- Module 4 OSPF.
As you can see, there are many topics that are covered in this course and on each of the topics there are sub-topics. A lot of LABS will be done on each of the topics so you can understand practically how you can configure all these topics on the MikroTik.
Requirements
Who this course is for:
For more information
https://i.mt.lv/cdn/training_pdf/mtcre_outline_2019181161836.pdf
MikroTik MTCWE – Certified Wireless Engineer Training Course
Wireless has become an essence in the IT industry, we do have wireless everywhere: at home, at work, in the restaurant, in the airport …. and everywhere.
MikroTik have a very reputable hardware when we speak about wireless. In addition of the WLAN, MikroTik devices works perfectly in the outdoor environment and they can be deployed for Point-to-Point and/or Point-to-Multipoint wireless networks. The only drawback is that configuring the wireless correctly on the MikroTik routers is a challenge.
For this reason, we have designed this course to be such a reference for you in case you want to deploy a wireless network using MikroTik products, or in case you want to be ready for the MikroTik MTCWE exam.
The MTCWE training is included the following:
- Module 1 wireless installation.
- Module 2 wireless standard.
- Module 3 wireless tools.
- Module 4 wireless troubleshooting.
- Module 5 wireless advanced settings.
- Module 6 802.11 n.
- Module 7 wireless security.
- Module 8 WDS and MESH.
- Module 9 wireless bridging.
- Module 10 Nstreme protocol.
- Module 11 NV2 protocol.
Requirements
Who this course is for:
For more information
https://i.mt.lv/cdn/training_pdf/mtcwe_outline_2019181161836.pdf
MikroTik MTCTCE – Certified Traffic Control Engineer Training Course
How to control traffic on MikroTik? A question that is always asked by students. If you have a network then you have traffic generated and the Mikrotik Router can control the traffic the way that you want.
For example you can create filter rules to filter the unwanted traffic passing via the router to the router itself. You can use the MikroTik firewall to block all type of attacks such as DOS, Ping flood, Syn Flood etc…
You can also create the QOS so you can classify the bandwidth based on type of traffic they do and you can prioritize important traffic. And much more things you can do with the control of your traffic on the MikroTik Router.
This course will help you to be ready for the MikroTik MTCTCE exam and it will contain a lot of real LAB scenarios to explain in detail the best way to make traffic control in your network.
The MTCTCE training is included the following:
- Module 1 packet flow diagram.
- Module 2 Firewall filter / NAT / Mangle.
- Module 3 quality of service.
- Module 4 DNS client / cache.
- Module 5 DHCP server / relay / client.
- Module 6 web proxy.
Requirements
Who is the target audience?
For more information
https://i.mt.lv/cdn/training_pdf/mtctce_outline_2020154113204.pdf
MikroTik MTCINE – Certified Internetworking Engineer Training Course
MikroTik MTCINE is the hardest and the more complex course track in MikroTik. Actually it is the one and only advanced course between all MikroTik courses and it requires as a pre-requisite the MTCNA course as well as MTCRE course.
As being a complex course, we decided to design this course in which we explain all topics of the MTCINE track. In this course, we will explain and do LABS about the Border Gateway Protocol (BGP) and Multiple Protocol Label Switching (MPLS) which are both considered very advanced topics and implemented inside the networks of the Internet Service Provider (ISP).
The MTCINE training is included the following:
- Module 1 border gateway protocol BGP.
- Module 2 multiprotocol label switch.
- Module 3 traffic engineering TE.
Requirements
Who this course is for:
For more information
https://i.mt.lv/cdn/training_pdf/mtcine_outline_2020154114220.pdf
MikroTik MTCUME – Certified User Management Engineer Training Course
MikroTik User Management is a very demanding topic in the networking industry especially if you work on MikroTik products.
we designed this course to help you understand all topics that comes inside the User Management and to make you ready for the MikroTik MTCUME exam.
In this course we are going to go in details about the User Management topics and will apply real LABS to show you step-by-step how you can do the configuration.
The MTCUME training is included the following:
- Module 1 PPP
- Module 2 PPTP/L2TP
- Module 3 PPPoE
- Module 4 PPP Bridging
- Module 5 IPSec
- Module 6 HotSpot
- Module 7 RADIUS
By end of this course, you will have a complete understanding of all those topics, and you will be ready for the MikroTik MTCUME exam.
Requirements
Who this course is for:
For more information
https://i.mt.lv/cdn/training_pdf/mtcume_outline_2019181161836.pdf
MikroTik MTCSE - Certified Security Engineer Training Course
As a network engineer, you have always a concern to protect your network from outside cyber attacks. This is most of the the time a challenge when it comes to deploy a security plan to your network.
MikroTik has an extensive firewall feature that can protect your network from all different types of Cyber attacks. The goal of this course is to show you all different steps using real LAB scenarios of how to protect your MikroTik router(s) from any type of cyber attacks and do not let hackers to compromise your network.
This course is based on the MikroTik MTCSE syllabus. So by taking this course, you will cover all the topics of the MikroTik MTCSE track and you will be ready for the exam.
In this course, we will issue cyber attacks to MikroTik router to see what are the weaknesses available on the router and then show you how you can protect it. All the course will be based on Hands-on LABS that you can re-do them yourself after following this course.
In this course, we will discuss about all security concerns in MikroTik and how to protect your router(s). Some example of the topics that will be explained are:
- Attacks, mechanisms and services
• The most common threats
• RouterOS security deployment
• Packet flow, firewall chains
• Stateful firewall
• RAW table
• SYN flood mitigation
• RouterOS default configuration
• Best practices for management access
• Detecting an attack to critical infrastructure services
• Bridge filter
• Advanced options in firewall filter
• ICMP filtering
• MNDP attacks and prevention
• DHCP: rogue servers, starvation attacks and prevention
• TCP SYN attacks and prevention
• UDP attacks and prevention
• ICMP Smurf attacks and prevention
• FTP, telnet and SSH brute-force attacks and prevention
• Port scan detection and prevention
• Introduction to cryptography and terminology
• Encryption methods • Algorithms – symmetric, asymmetric
• Public key infrastructure (PKI)
• Port knocking
• Secure connections (HTTPS, SSH, WinBox)
• Default ports for the services
In addition of all those security topics, there is one module which explain about the VPN tunneling and will contain the following topics:
- Introduction to IPsec
• L2TP + IPsec
• SSTP with certificates
Requirements
This course is ideal for Network engineers, technicians and students wanting to deploy and secure MikroTik device based networks. The content of this course is very rich and it has a lot of hands-on LABs so you are more familiar about the types of attacks and how to protect your MikroTik routers from them.
For more information
https://i.mt.lv/cdn/training_pdf/mtcse_outline_2019181161836.pdf
MikroTik MTCSWE - Certified Switching Engineer Training Course
The MTC SWE (MikroTik Certified Switching Engineer) Level 2 training is intended for network and system engineers administering medium and large networks, as well as for all IT professionals who want to improve their knowledge in the field of L2 switching.
During the training, the theory of L2 is analyzed – the principles of frame switching, types of L2 communication – unicast, broadcast, multicast. You will get acquainted with MikroTik equipment, in which there are basic switch chips, as well as switch chips with advanced capabilities (CRS3xx), you will get acquainted with the second MikroTik operating system – SwOS and its capabilities.
The course discusses in detail the aspects of configuring VLAN in various ways and on different equipment – the software method and through the switch chip. The options will be port based vlan, protocol-based vlan, mac-based vlan, as well as routing between VLANs – the so-called “router on a stick” (router-on-the-stick). Also, the course understands QinQ (vlan in vlan), configured in a software way and in a hardware way.
Much attention in the course will be paid to the formation of loops in the network on L2 equipment and the fight against them – using the STP, RSTP, MSTP protocols, as well as using the bridge horizon.
The most interesting and useful opportunities open up when using bonding , we will consider its creation in a software and hardware way, as well as deal with the possibilities of powering equipment via Ethernet – PoE: types, priorities and monitoring.
The course also covers the topics of security and monitoring – finding network problems and solving them using built-in tools.
The course also ends with a certification exam, after successfully passing which you will receive an international MTCSWE certificate .
Topics that will be included in this course are:
-MTU
-VLAN
-STP
-Link Aggregation
-Port Isolation
-L2 QOS
-L2 Security
-PoE
-Tools
-SwOS
Course outcomes
By the end of this training session, the student will be familiar with RouterOS Layer 2 forwarding software and RouterBOARD hardware switch chip features and bridge features. The student will be able to configure and control Layer 2 data forwarding using latest MikroTik networking solutions.
Requirements
Target audience
Network engineers and technicians wanting to deploy and support Layer 2 based networks.
For more information
https://i.mt.lv/cdn/training_pdf/mtcswe_outline_202083141326.pdf
MikroTik MTCEWE - Certified Enterprise Wireless Engineer Training Course
Wireless networks in homes, offices, cafes and urban spaces are no longer just single devices, but WiFi network systems consisting of multiple APs working within one wireless network managed from one central point called the controller.
During the training, participants will become familiar with the controller (CAPsMAN) service. During the course the functionality of the wireless network controller and additional elements such as the HOTSPOT mechanism will be discussed. Participants will implement advanced scenarios: multiple SSID networks, work with VLANs, installation of the controller in the cloud (VPS), Access List, use of the HotSpot central user base (Radius user-manager) and personalization of the welcome page.
Course prerequisites:
- Completed Mikrotik MTCNA course
- Basic understanding of network system
- Good knowledge about RouterOS (recommended)
During training students will learn about:
- 802.11 b/g/n/ac/ax/ad Wireless protocol
- WiFi controller
- Site-survey – best practice
- 60GHz wireless – 802.11.ad
- How to correctly design enterprise wireless network
- Authentication methods: WPA, Radius, Hotspot
- Creating welcome page
- MAC address authentication (access-list, radius)
- Hotspot type network (open)
- Back-up CAPsMAN controller configuration (failover)
- Configuring cloud based wireless controller
- Analysing the System Log for wireless network problems
Course outcomes
Graduates will be capable of managing large scale RouterOS Wireless networks.
Requirements
Target audience
Network engineers and technicians aim to deploy and serve large scale corporate networks.
For more information
https://i.mt.lv/cdn/training_pdf/mtcewe_outline_202083141141.pdf
MikroTik MTCIPv6E - Certified IPv6 Engineer Training Course
A comprehensive course on IPv6, including an introduction to the protocol and its differences to IPv4. A deep-dive will cover how IPv6 and its constituent parts function and interoperate. The theory will be complemented by hands-on labs using and configuring IPv6 in MikroTik’s RouterOS.
Designed for all network engineers and technicians wanting to deploy IPv6-based networks in enterprise and broadband environments. By the end of this training session, delegates will be familiar with IPv6 protocol and be capable to implement IPv6 network.
Due to the IPv4 address deficit, administrators are increasingly implementing IPv6 addressing in their networks. At the MTCIPv6E training, participants will learn how to work with IPv6 addresses: create entries in routing tables, configure a firewall, assign addresses for end devices, set up secure connections (VPN) between company branches. The concept of migration from IPv4 to IPv6 available to users of the RouterOS system will be presented.
During training students will learn about:
- Introduction to IPv6 protocol
- Address configuration in IPv6
- IPv6 routing basics
- IPv6 autoconfiguration (stateless (SLAAC, DHCP), statefull (DHCP))
- IPv6 security
- Transision Mechanisms (DualStack, 6to4, 6RD, Teredo, DS-Lite)
Requirements
For more information
https://i.mt.lv/cdn/training_pdf/mtcipv6e_outline_2019181161836.pdf